Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace them, UPVC Window Repairs and the new window will usually fit inside the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the distance between the door and the window is substantial, you may want to use a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and check for an appropriate fit. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you can't reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have become undone over time, but it can also be due to the mechanism of the handle getting worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and then perform a test to ensure that it fits. The corners of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's important to take action. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a relatively easy fix and should be undertaken by any competent DIYer. Based on the severity of the issue the caulking that was used up might need to be removed before a fresh layer can be applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the problem is related to the seal, not the frame. This can be easily corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens in the breeze. They can be replaced by any competent DIYer and can be done within a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

Check that the uPVC hinges open and close in the correct direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us a picture through our website can often solve the issue. We are happy to provide assistance.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also because of wear and tear, may become displaced, which causes a gap to form where the sash meets the frame. This can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. Second, the interlock can be unbalanced. This is located on the hinge's side and might require to be cleaned. In some cases it is possible to replace the hinges.

The next most common reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc window repairs will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and they may reach the point when it's more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.