Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might be interested in the security door UPVC window repairs with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sagging. A sagging window can cause problems with light, draughts or even security. It is crucial to act when you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. With a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loose their elasticity. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it could be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and then perform an experiment fitting. The corners of the sash need to align with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on the severity of the issue the caulking used previously might need to be removed before a fresh layer can be applied. It is essential to remember that when it is about upvc window repairs - just click the next post, you should not be tempted to 'over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazing-glazed glass, it is more likely that the issue is more with the seal than the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze It could be hinges that are at fault. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It's easy to replace a hinge on a window however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. This can often be resolved by sending us a photograph via our website and we will be pleased to offer you advice.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window doctor.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become unbalanced due to wear, creating a gap where the sash meets frame. If they're beyond repair, it might be required to realign them. The interlock, which is on the hinge side of the window, may be misaligned. Again, it's feasible to give them a clean but in some cases it might be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air to escape. Installing high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes filled with some kind of filler. They can be positioned on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and eventually, they will reach an point at which it is more economical to replace them than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as possible.