Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. However, if you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to find some plastic spacers that will help the new pane to fit correctly into the window frame.

If you plan to attempt to remove the window panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and double glazing repair Macclesfield repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. In time, they could be affected by a variety of issues that include sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows so you can access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and check for fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it can also be due to the mechanism of the handle getting worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and then perform a test fitting. The corner joints of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you wake up every morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window repairs Walsall. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double glazing repair Barnet Glazing repair Macclesfield (www.repairmywindowsanddoors.co.uk)-glazed glass it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease, it may be hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process but it can be easier if you have someone to help hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges, also due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is on the hinge side of the window, can also be misaligned, and again it's possible to give them a clean but in some cases it might be necessary to get them replaced.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. It is important to remember that all windows will eventually wear out and it could be more cost-effective to replace them instead of fixing them. If you have any problems with your window made of upvc you should consult an expert as soon as you can.